Aerosoft Hamburg-Fuhlsbüttel / Hamburg „Helmut Schmidt”
Introduction
Oops, the title is a bit complicated, isn’t it?
It was formerly named Hamburg-Fuhlsbüttel Airport, a name still frequently used. Hamburg Airport is the fifth-busiest of Germany’s commercial airports. Since November 2016, the airport has been named after the former German Chancellor Helmut Schmidt. This name change is in accordance with other major German airports that also have additional names, such as EDDM München Franz Josef Strauß.
Scenery has been somewhat neglected by me for the last while. With beautiful, detailed freeware scenery out there, payware just hasn’t been in my scope much. However, that has changed for a while now, although there are sometimes unbelievably beautiful freeware scenery available. The level of detail and attention you can get in payware scenery is generally much higher than in freeware, though there are exceptions.
I began to feel like I wanted something more detailed and realistic to look at while flying around. To have specific destinations that I knew would look beautiful, including orthophotos around the area, custom buildings and detailed lighting, vehicles, jetways, gates, the whole thing. And because I worked for several years at Lufthansa Technik and visited the Lufthansa base to provide training for ground engineers, Germany remains one of my favourite nearby destinations. That said, I decided to take a look at Aerosoft’s own EDDH – Hamburg Airport.
In 2015, approximately 15.6 million passengers used the airport, making it the fifth busiest airport in Germany by passenger numbers. The airport is a hub for Lufthansa’s subsidiary Eurowings and for low-cost carriers easyJet and Ryanair. The busiest route at the airport is to Munich. Because the airport also serves as an alternate airport for Finkenwerder, the airfield and manufacturing site of Airbus, the runways and platforms are suitable for the Airbus A380. (Courtesy Wikipedia)
I am looking forward to exploring Hamburg Airport. Although I never flew to/from this well-situated airport, I did spend some time in the maintenance area. In the past, JustSim made this airport for X-Plane 11, but this time it is up to the SimWings/Aerosoft development team to create something nice and realistic. Let’s check that out, right?
Installation and what more
Installation goes via the Aerosoft One installer program. I am not sure when you buy the product from X-Plane.Org. It could be that in that case it will be a ZIP file. One way or another, via the Aerosoft One, you can point the installation to either the X-Plane 12 directory or the Aerosoft library. For a ZIP file, unzip it and copy the folder to the X-Plane Custom Scenery folder. The total unzipped size is 2.8GB, of which 878 MB is for the seasonal ortho textures.
Features
Before I forget it, what are the features of this SimWings/Aerosoft product? Let me highlight this for you since it is a very impressive list:
- Highly detailed scenery of Hamburg Airport and the immediate vicinity.
- Realistic 3D ground with elevated Lufthansa maintenance, lowered highway and half-covered highway.
- Aerial photo for the airport and the surrounding area, elaborately color-corrected for a true colour display (incl. normal map and seasonal variants).
- Detailed ground lines and stands.
- New “Interims Terminal” and new stands according to the ground maps of the airport operator.
- Extremely detailed Hamburg airport buildings with interiors and all auxiliary buildings.
- Lufthansa maintenance area.
- Animated jetways, stairways, marshaller and VDGS (SAM3 or OpenSAM required).
- Many static apron vehicles and custom animated vehicles.
- Realistic nighttime dynamic lighting and reworked autogen and street placement.
- Full support for native XP12 seasons, with no other add-ons or plugins.
- Weather effects for wet, snow and ice.
- XP12 3D vegetation for forests, trees and bushes for seamless integration into the environment.
OpenSAM
One of the required items is SAM3 or OpenSAM. Since SAM3 isn’t compatible with X-Plane 12, we need to rely on OpenSAM. As of this writing, March 2026, OpenSAM is no longer available via X-Plane.Org and has moved to GitHub. Mid February 2026, the current version is 4.5.1 and can be downloaded from this URL. When you do so, please download the correct version, as there’s one for X-Plane 11 and another for X-Plane 12.
Manual and OPTIONS
I checked the Aersoft One installer, EDDH, as well as the installed scenery folder, but the package doesn’t include a manual. You could say then that there’s nothing to configure with this EDDH, but there’s a folder named OPTIONS. One option folder refers to Autogen, where you can choose SimHeaven or the default. No further explanation is given except for how to change to the other autogen folder. The other options folder is named Experimental Features. Luckily, by default, all features are enabled, but you can change the feature level by using the other folder. So, for this, no worries about missing any features in this airport scenery.
Well, apart from some installation instructions telling you almost what I just told. This means the airport scenery doesn’t include any charts of the airport layout or other charts, such as the SID (Standard Instrument Departure) and STAR (Standard Terminal Arrival Route). A chart document would have been nice, as some other scenery developers do include. Anyway, it isn’t included. Since this is the airport scenery version 1.00, there’s no changelog text file included.
Impression
How does it look?
There are three items to answer “how does it look like” to. The first is how the textures look: runways, taxiways, aprons, grass, all of that. Basically, what’s on the ground in and around the airport.
The second item to find out is how the buildings are modelled. Are they modelled well? Do they line up and connect properly? How detailed are they?
And the last question is: are there any static vehicles? Most likely there are, but I’m still wondering what they look like. Perhaps there are moving vehicles (objects) and perhaps also animated people on the apron? And finally, other animations and static aircraft and if there are static aircraft, are you able to disable them in case you use an AI-generated aircraft program?
Ground textures
While there’s a lot of grass decorations and the runways look very good, the taxiways are nicely modelled too. They have different patches and placements, but there are a lot of coloured strips and other things, as it is mostly in reality too. This means there are a number of places where lines and blocks run along the asphalt in dark colours, compared to the lighter colour around them. Although EDDH isn’t a huge airport, it still has many interconnected taxiways and aprons. And EDDH has a huge apron for parked aircraft, and let’s not forget the Lufthansa Technik apron area.
Modelled buildings
I could easily say to myself, “it looks all great”, but that wouldn’t be fair, since the airport includes terminal buildings, additional buildings outside the airport fence, whatever that may be, and the previously highlighted Lufthansa Technik maintenance area. That is perhaps not as big as the airport buildings; however, it is still a substantial part of EDDH.
Regarding the airport “outside the fences buildings”, I can be very positive.
This adventure starts while driving on “road 433”. The road textures could be a bit better. Right now, they are a bit blurry; this is especially visible when they are connected to the sharp object textures of the airport itself, but OK. Anyway, the buildings along 433, like the carparking and the Radisson Hotel, are beautiful, as are all the connecting roads up to the terminals. Most of the time, no one sees this since they all arrive at the terminals and end their flight. So yes, when you have the time, jump out and check out the “outside the fence” area. It is worth it!
Lettering, numbers and shapes are correct, but above all, nice to see that so much time and effort is put into it. The texturing is beautiful as well, though sometimes a little low-resolution on some of the smaller, less important buildings. Continuing with the terminal 1 and 2 buildings, wow, that’s impressive. Although I checked these with real photos found on the Internet, the modelled EDDH terminals look and feel almost as real as the real ones. Oops, I almost forgot that the terminals are modelled on the inside as well. Not bad at all. That doesn’t sound very enthusiastic, but these buildings are empty. There’s nobody inside ……. I know, just a minor detail.
Back to the area outside of the terminals. The entrance-, middle-, and exit roads along the terminals are well done. The signs are in place, sharp, crispy to be honest, and lots of cars. Talking about cars, there are many cars parked at the car parking roof near the Radisson Hotel. And no tiny object is forgotten to complete a realistic look.
Overall, well done!
It is time to check out the terminals on the “inside of the fences”. Wow, walking along the terminals on the apron, seeing all the static and animated equipment, the jetways, the stairs to the jetway, but above the terminal buildings themselves. This is really of a high quality, with razor-sharp textures.
Generally speaking, the fencing and the custom parking assist are in place, with the beautifully modelled jetways connecting to the main terminals. See-through glass and text, stairs, logos and air conditioning units, or that’s what they look like, make them gorgeously realistic and a pleasure to look at. These kinds of details are what really make immersion happen for me, but also for you.
What I really like is the night lighting for the buildings and the apron. The terminal glass that is used is slightly tinted. During the day, you can already see this, but at night, it is absolutely not transparent, which is good news. Instead, it has a slightly grey, transparent look.
This nice look can be seen when you’re in a jetway or the passenger waiting area. The only item I dislike is the static people waiting for the gate, and the completely empty waiting area; no benches, no tables, nothing. Completely empty. A little unrealistic, but what the heck … who checks this out in detail!
Moving on to added features like moving vehicles and equipment/animations, I am pretty satisfied as well. There are many custom vehicles with the airport’s name and logo. Additionally, there are cargo containers, traffic cones, air stairs, and light poles with small poles around them. There’s a moving radar dish, some lights around a piece of road decoration just on the outer edge of the airport, and many of the vehicles also have night lighting in the form of headlights.
Also, the jetways are animated, which lets them connect to your airplane when shut off. Furthermore, parking guidance, the so-called VDGS (Visual Docking Guidance Systems), shows you how far you are from needing to stop and whether you need to correct left or right. This works and is integrated well. The lower part normally covered by the black frame will then flicker through, showing more of the display.
The apron/gate lighting is very nice. It lights up the ground well and seems very close to real life, based on the pictures I’ve found online. The orthophoto ground texturing at the airport itself is stunning. Those ortho textures outside the airport are of lower quality, not unusual. This is in particular when you look at the road textures, which. I mentioned that before, a bit blurry. Together with all the 3D X-Plane 12 trees, a perfect match.
Lufthansa Technik Base Hamburg
Hold on, let’s briefly visit the modelled Lufthansa maintenance area. I wrote it before; it is a structural part of the modelled EDDH. Since I’ve been her suring my freelance period a couple of times, I know a bit what to expect. I don’t expect that all the maintenance hangars, buildings, work or repair shops, and so on are modelled as they are, although I’ve already seen specific objects that are as real as they are.
As you can see in the first screenshot below, the maintenance area is huge. I think that it is Lufthansa Technik’s largest maintenance base in Germany, followed by Frankfurt or Munich. I mentioned this before: I am not sure whether all the buildings are exact replicas of the real ones, but certain buildings are as real as it gets. The tall building at the entrance with Lufthansa Base Hamburg, the entrance flying wing gate, the billboard directly behind it and the several medium to large-sized hangars.
Once passed the Flying Wing gate, I turn left towards the large hangars at the end. Although I don’t see it yet, I actually pass several hangars on my right-hand side. The hangars are behind the other buildings, which are most likely workshops, including the engineering departments. Further, on my left-hand side offices and what else more. At the end, I park my car and walk around the impressive hangar at the far end.
Very well modelled, as are the apron and the engine test area; I do see the control tower already dominating the sky. I am impressed by all of this. Opposite the yellow control tower are 2 other older hangars; nonetheless, the 3D artist’s work is well done.
Real EDDH versus Modelled EDDH
Next up, I’ll take a look at the different areas and how closely they match the real airport’s layout. This concerns things like different gate and stand numbers, taxiway numbers and signs, and hold points.
Let’s start at Terminals 1 and 2.
It’s simple: compared to charts, it all looks pretty much exactly right. Gate and jetway numbering is correct. The ground markings pointing to them from taxiway Z1 are both the right ones and positioned as they should be. Aircraft start places, so where the airplane is put when you select a stand/gate, are nicely aligned with the lines indicating where to stop and of course what line to follow with the nose gear. This is basically the same as with the cargo terminal. And, luckily, the south apron stands around the corner and seems to correct itself, too.
Onward to the separate aprons, we find that apron 1 is, in fact, quite well done, seeing as it’s very simple. The two big lights that illuminate this platform are both present and in the right places. The same goes for the white apron outlines, the taxiways surrounding it, and the variety of coloured ground materials.
Apron 2 isn’t different. Meant for the smaller airliners and turboprops, this well-lit apron is quite nice to look at and stand at. The light poles are good-looking, and the markings are again correct and complete. The view this apron offers toward pretty much any part of the airport, due to its central position, makes it my favourite part of the airport for its views.
When it comes to sheer coolness, I’ll always take terminals with jetways with rows of aircraft! The adjacent General Aviation apron is similar, except for the ground markings. The curved lines indicate the required turn to end up facing the right way so you can taxi away again later. Aprons 4, 5, and 6 are located in the airport’s maintenance area. The Lufthansa Technik buildings that are attached to them are, as mentioned previously, gorgeous. Otherwise, these are pretty empty aprons that don’t feature static aircraft or other vehicles.
A number of buildings just outside the airport perimeter are hand-placed. While they do not appear to be custom-made and don’t always therefore have the same exact shape, they do fit the locations of the buildings on the orthophotos. In other places, buildings are more randomly positioned and decidedly not in the places of real-life buildings.
This might well be because those areas use autogen rather than hand placement.
Performance
For such a medium-complex scene, it definitely runs very well. Every area will offer different frame rates depending on the complexity of the objects, the number of objects, and eventually trees. All of this can and will influence the performance.
Nevertheless, this scenery definitely stacks up well. On my MacBook Pro with M4 Max CPU, I can easily get 30-40 FPS, and yes, I am also aware that it depends on so many factors, which FPS figures you can get. I have seen 60-70 FPS, as well as 25 FPS. Anyway, it is not a “complex loaded” scenery, though it comes with a lot of objects.
The previous screenshots were taken from different angles, with real weather and WorldTraffic active in real time. I am pleased with the frame rates under different conditions. I used the FlightFactor A350 as the base aircraft to make these screenshots.
Summary
At about € 20, I can definitely recommend this product. It is dedicated to X-Plane 12 and not an updated version of X-Plane 11. While the taxiway/apron texturing may be quite standard in terms of materials, it includes some very unique shapes and is accurate. Taxiway, gate and runway signing is great and accurate, and let’s not forget the terminals and other buildings outside the airport fence. And did I cover every corner of this airport? For sure, I have forgotten certain corners, but the overall is covered.
Additionally, the runways look very nice with custom texturing work and hand-placed materials. The jetways are well modeled and with detailed buildings and objects, this scenery is definitely recommended for those who like to visit German airports.
As of this writing, March 8th, 2026, this review covers the SimWings/Aerosoft Hamburg Airport version 1.0.0. For this review, including the screenshots I made for this review, I used the following add-on software:
– Payware | X-Plane 12.4.0-r2
– Payware | Navigraph AIRAC Cycles and Charts
– Payware | World Traffic 3
– Freeware | BetterPushback 1.11
You can grab your copy from the dedicated Aerosoft store page, from simMarket and X-Plane.Org.
There’s still JustSim with a version of EDDH, which they updated from X-Plane 11, but I have no chance to test this unless I contact either SimMarket or X-Plane.Org. In other words, I am not able to compare these two X-Plane 12 EDDH airports.
Feel free to contact me if you’ve got additional questions related to this impression. You can reach me via email Angelique.van.Campen@gmail.com or to Angelique@X-Plained.com.
With Greetings,
Angelique van Campen
| Add-on: | Aerosoft/Sim-wings Hamburg Airport for X-Plane 12 |
|---|---|
| Publisher | Developer: | Aerosoft / SimMarket / X-Plane.Org | Sim-wings/Aerosoft |
| Description: | Ultra realistic rendition of Hamburg Airport |
| Software Source / Size: | Download / Approximately 2,87GB (zipped) |
| Reviewed by: | Angelique van Campen |
| Published: | March 8th 2026 |
| Hardware: | - Apple MacBook Pro M4 Max / 64Gb memory - 1TB Flash Memory - Thrustmaster TCA Captain Pack Airbus Edition |
| Software: | - macOS Tahoe (26.x) - X-Plane 12.4.0r2 |
















































0 Comments